Metalcraft Roofing
Waikato Sheds use Metalcraft Roofing for their custom built shed roofs, skylights and guttering.
Bevelback Weatherboard
COVER
812 mm
SHEET WIDTH
842mm
APPLICATION
Residential, Commercial, Rural, Industrial roofing and cladding
ORIENTATION
Horizontal wall cladding only.
ABOUT
Metalcraft Bevel Back Weatherboard is a traditional cladding system blending in with modern and traditional design surroundings. Metalcraft Bevel Back Weatherboard is cost effective cladding option to match your weatherboard house. It is available in Zincalume®, Galvsteel®, Colorsteel® Endura® and Colorsteel® Maxx®.
AVAILABILTY
Manufactured in Palmerston North. Available nationwide for our kitset clients. We install and build with it in the Greater Waikato, Bay of Plenty, Coromandel and Taupo.
Skylight
Ampelite introduced Wonderglas gel coated sheeting to New Zealand in 1995 expressly to combat our very harsh environments. Wonderglas S-996 continues to be a preferred solution for buildings throughout New Zealand and Australia. Wonderglas S-996 is recommended for commercial and retail applications where excellent long term light transmission is required. Waikato Shed Company use this product in residential settings too, allowing all our clients who want to incorporate skylights into their roof the benefits of this quality product. Those benefits are:
- Surface erosion (fibre show) is eliminated.
- Superior resistance to yellowing and hazing.
- Minimal loss of light transmission over life.
- 99% protection from UV rays.
- More cost effective over the life of the building
Clear allows the most light transmission at 80% with Opal at 60% and Grey at just 33%
Suitable for use with corrugate and 5 Rib profiles
Corrugate
A TRUE KIWI ICON
Corrugate profile is cost effective and versatile, able to handle a wide range of roofing and wall cladding applications Corrugate profile can also be bullnose curved. Corrugate is available in Zincalume®, Galvsteel®, Colorsteel® Endura® and Colorsteel® Maxx®.
COVER
760 mm
SHEET WIDTH
851 mm
MINIMUM PITCH
8°
CURVING
Bullnose, Drape and Spring Curving options available
APPLICATION
Residential, Commercial, Rural, Industrial roofing and cladding
ORIENTATION
Roofing and both vertically and horizontally laid cladding
AVAILABILITY
Nationwide
Metrib 750
ABOUT
Metrib750 is a 6 rib trapezoidal profile which is ideal for residential roof and wall cladding solutions. Metrib750 can also be used in commercial wall cladding
COVER
750 mm
SHEET WIDTH
800 mm
MINIMUM PITCH
8° (minimum pitch will increase depending on sheet lengths.)
CURVING
Bullnose, Drape and Spring Curving options available
APPLICATION
Residential, Commercial, Rural, Industrial roofing and cladding
ORIENTATION
Roofing and both vertically and horizontally laid cladding
AVAILABILTY
Manufactured in Hamilton. Available from all Metalcraft Roofing branches.
KĀHU® HAS BEEN DESIGNED FOR ELEGANCE, STYLE AND EXTRA PERFORMANCE
Designed to maximize the visual impact. High angular ribs create deep shadow lines for a bolder statement for any home or commercial project.
DOUBLE CAPILLARY OVERLAP
Greater weather performance is achieved with the double capillary overlap as it provides an extra capillary barrier to the standard capillary groove, giving extra peace of mind. The double capillary overlap requires only one rib lap. This increases the cover sheet size and speeds up installation time, providing a cost effective roofing and cladding solution. For wall cladding applications the exposed capillary groove on the overlap can be omitted providing a smoother appearance.
Kāhu®
CONTEMPORARY PROFILE
Kāhu® is a symmetrical profile designed for the modern day home it offers the same playful lines as the traditional Corrugate profile, its angular form and high ribs create bolder shadow lines for that stronger statement. The high ribs allows Kāhu® to be laid at a lower pitch than Corrugate.
COVER WIDTH (NOMINAL)
875 mm
SHEET WIDTH (NOMINAL)
950 mm
MINIMUM PITCH 3°
The minimum pitch is determined by the ability of the roof cladding to discharge maximum rainfall without water penetration through the side laps, end laps or flashings.
The minimum pitch for Kāhu® is: 3° for sheet lengths of 40m.
4° for sheet lengths exceeding 40m but less than 60m
The above minimum requirement has been calculated assuming peak rainfall to be less or equal to 100mm/hr.
APPLICATION
Suitable for residential and commercial
ORIENTATION
Roofing and both horizontally and vertically laid cladding
MATERIAL OPTIONS
COLORSTEEL® ENDURA®, COLORSTEEL® MAXX®. Aluminium also available.
T-RibMC770
ABOUT
MC770 is a popular and versatile 5 Rib trapezoidal profile that is used in commercial or residential roof and wall cladding applications. MC770 provides the value of Corrugate whilst being able, by design, to achieve roof pitches down to 3 degrees and is available in Zincalume®, Galvsteel®, Colorsteel® Endura® and Colorsteel® Maxx®.
COVER
770 mm
SHEET WIDTH
835 mm
MINIMUM PITCH
3° (minimum pitch will increase depending on sheet lengths.)
CURVING
Bullnose, Drape and Spring Curving options available
APPLICATION
Residential, Commercial, Rural, Industrial roofing and cladding
ORIENTATION
Roofing and both vertically and horizontally laid cladding
AVAILABILTY
Manufactured in Hamilton. Available from all Metalcraft Roofing branches.
Dimensions, cover and sheet widths are all nominal and may vary with manufacturing and installation tolerances.
Box Gutter 125
ABOUT
A popular rainwater system solution that is predominantly used in residential applications. With clean, bold lines and a high face. Box Gutter 125mm conceals the sheet ends at the eave line and looks great with profiled Longrun sheeting or Tile roofing Internal and external brackets are available in this profile and it is suitable for use with Fascia 185, Fascia 155 and Fascia 135. Available in Zincalume®, Galvsteel®, Colorsteel® Endura® and Colorsteel® Maxx®.
CROSS SECTIONAL AREA
8435mm²
AVAILABILTY
Manufacturing Locations: Auckland and Palmerston North. Available from all Metalcraft Roofing branches
Box Gutter 175
CROSS SECTIONAL AREA
19250mm²
AVAILABILTY
Manufacturing Locations: Auckland. Available from all Metalcraft Roofing branches
ABOUT
A popular rainwater system solution that can be used in either commercial or residential applications. It is able to handle larger volumes of water, and is easy to clean out if required. Box Gutter 175mm can be fixed either with internal or external brackets. Available in Zincalume®, Galvsteel®, Colorsteel® Endura® and Colorsteel® Maxx®.
Quarter Round Colonial Gutter
CROSS SECTIONAL AREA
4880mm²
AVAILABILTY
Manufacturing Locations: Palmerston North. Available from all Metalcraft Roofing branches.
ABOUT
A classic gutter profile that compliments any eave line. Looks good with either profiled Longrun or Metal Tile roofing. Available in Zincalume®, Galvsteel®, Colorsteel® Endura® and Colorsteel® Maxx®.
